2006

DeCaires, Brian J. K., - Variation Analysis of Involute Spline Tooth Contact.

Taylor, Matthew H., - Developing a Model for Tool Consumption Rate on Asphalt Reclamation Machines.

2004

Stewart, Michael L., - Variation Simulation of Fixtured Assembly Processes for Compliant Structures Using Piecewise-Linear Analysis.

2002

Mortensen, Alan J., - An Integrated Methodology for Statistical Tolerance Analysis of Flexible Assemblies.

Tonks, Michael R., - A Robust Geometric Covariance Method for Flexible Assembly Tolerance Analysis.

2001

Dabling, Jeffrey G., - Incorporating Geometric Feature Variation with Kinematic Tolerance Analysis of 3D Assemblies.

Smith, Daniel K., - Constraint Analysis of Assemblies Using Screw Theory and Tolerance Sensitivities.

2000

Stout, Jeffrey B., - Geometric Covariance in Compliant Assembly Tolerance Analysis.

1999

Bihlmaier, Bryan F., - Tolerance Analysis of Flexible Assemblies Using Finite Element and Spectral Analysis.

Faerber, Paul J., - Tolerance Analysis of Assemblies Using Kinematically-Derived Sensitivities.

Soman, Shrinivas M., - Functional Surface Characterization for Tolerance Analysis of Flexible Assemblies.

1998

Merkley, Karl G., - Tolerance Analysis of Compliant Assemblies, PhD Dissertation.

1997

Anderson, Taylor B., - Surface Variation and Mating Surface Rotational Error in Assemblies.

Cvetko, Robert, - Characterization of Assembly Variation Analysis Methods.

Warnick, Ryan W., - Identifying Critical Part Dimensions for Tolerance Analysis Using Constrained CAD Models.

1996

Law, Marvin J., - Multivariate Statistical Analysis of Assembly Tolerance Specifications.

1995

Brown, Christopher T., - Statistical Models for Position and Profile Variation in Mechanical Assemblies.

Huo, Hanqi, - New Tolerance Analysis Methods for Preliminary Design. PhD Dissertation.

Stoddard, James T., - Characterizing Kinematic Variation in Assemblies from Geometric Constraints.

1994

Cheney, Douglas C., - A User Interface Specification for CAD/CAM Application Development.

Glancey, Charles G., - A Second-Order Method for Assembly Tolerance Analysis.

1993

Carr, Charles D., - A Comprehensive Method for Specifying Tolerance Requirements for Assemblies.

Gao, Jinsong, - Nonlinear Tolerance Analysis of Mechanical Assemblies. PhD Dissertation.

Trego, Angela, - A Comprehensive System for Modeling Variation in Mechanical Assemblies.

1992

Jackson, David B., - A Standard Approach to Developing Application Programs for Geometric Modelers.

Ward, Kerry, - Integrating Geometric Form Variations into Tolerance Analysis of 3-D Assemblies.

1991

Goodrich, Callis G., - Representation and Modeling of Geometric Form Variations for 3-D Tolerance Analysis.

Larsen, Glen C., - A Generalized Approach to Kinematic Modeling for Tolerance Analysis of Mechanical Assemblies.

1990

Andersen, Carl B., - General System for Least Cost Tolerance Allocation in Mechanical Assemblies.

Peterson, Douglas M., - A Closed-Form Model for Tolerance Analysis of Two-Dimensional Mating Hole Patterns.

Simmons, Andre P., - Automated Vector Loop Generation for Kinematic Models of Mechanical Assemblies.

1989

Larsen, David V., - An Efficient Method for Iterative Tolerance Design Using Monte Carlo Simulation.

Newcomb, Michael A. - Predicting the Curvature of Etched Silicon Wafers Subjected to Thin Film Residual Stress

Nielsen, Dale B., - The Application of Convolution Methods to the Statistical Analysis of Mating Hole Patterns.

Robison, Richard H., - A Practical Method for Three-Dimensional Tolerance Analysis Using a Solid Modeler.

1988

Chun, Ki Soo, - Development of Two-Dimensional Tolerance Modeling Methods for CAD Systems.

Kulbeth, Roger W., - Performance Evaluation of a Modified Savonius Windmill.

Marler, Jaren D., - Nonlinear Tolerance Analysis Using the Direct Linearization Method.

Rime, Craig N., - CICATS: CADAM Interface to Computer-Aided Tolerance Selection.


1987

Greenwood, William H. - A New Tolerance Analysis Method for Engineering Design and Manufacturing. PhD Dissertation.

Hauglund, Loren F. - Combining Manufacturing Process Selection and Optimum Tolerance Allocation in Design Automation.

Loosli, Bruce G. - Manufacturing Tolerance Cost Minimization Using Discrete Optimization for Alternate Process Selection.

Merkeley, Karl G. – Methodologies for Representing and Transmitting Geometry Used in Engineerng Models.

1986

Billings, David T. - Tolerance Analysis as an Integral Part of Design Optimization.

Treanor, David H. - Derivation of Optimal Coupler Curve Linkages Through Evaluation of the Tri-circular Sextic.

1985

Pettit, Richard R. - Geometric and Optical Properties of Inflatable Point-Focusing Reflectors.

Ross, Brant A. - Flexible Engineering Software: An Integrated Workstation Approach to Finite Element Analysis.

Yang, Da-Zheng - Initial Development of the CATS.BYU Computer Program for Tolerance Specification.

1984

Ames, Arlo L. - Development of an Interactive Three-Dimensional Finite Element Mesh Generator.
Nish, Randall W. - Finite Element Modeling of Metal-Forming Processes.

1982

Skinner, Kristian D. - A Computer Model of the Transient Temperature Distributions in a Cast Iron Ingot Mold.

Iverson, Michael P. - Graphics Support Programs for SAPIV.

1981

Hulme, Douglas D. - Thermal Stress Analysis of Banded Ingot Molds

Moore, Thomas W. - The Development of a Computer Program for Manufacturing Quality Control.

Treseder, Robert C. - Development of a Finite Element Graphics Library at BYU.

1980

Lyle, Donald S. - Design and Construction of a Photographic Slide Editing Machine.

Ross, Brant A. - Development of an Interactive Version of the Mechanism Structural Analysis Computer Program.

1979

Russon, Virgil K. - Advanced Disk Cam Design Using Numerically Generated Follower Motion.
1978

Larkin, James R. - Synthesis of Path Generating Four-Bar Mechanisms: An Optimization Problem.

Mahlum, Douglas L. - Computer Analysis of Oil Well Drill Bits Employing Circular Synthetic Diamond Cutters.

1977

Condie, Clair G. - An Application of Computer Optimization Techniques to 4-Bar Linkage Balancing.

Haroldsen, Craig G. - Experimental Determination of the Stiffness of Bolted Members

Johnstun, Walter E. - Computer-Aided Optimization of Double-Reduction Gear Systems
1976

Christensen, Kirk Le - CAMDES: A Computer Program for the Design of Disk Cam Mechanisms.

Hills, Richard Packard - FREUDB--An Interactive Computer Program for Synthesis of Four Bar Linkage Function Generators.

1975

Detro, David L. - Application of Gradient Optimization Methods to the Determination of Model Parameters for Distributed Systems.

Zirker, Eugene - Dynamic Simulation Language for the Dynamic Analysis and Synthesis of Mechanical Systems.

1972

Whiting, Richard Harold - Studies in Energy Dissipation in a Quick-Opening Valve.

1970

Lyle, James Alan - The Design of a Hypervelocity Light Gas Gun.

Shah, Jitendra S. - Light Gas Gun-Quick-Opening Valve Simulation.