SIGNIFICANT RECENT PUBLICATIONS

2007

Harb, J., Rowley, R., Magleby, S., and Parkinson, A., “Going Global: Implementation of a College-Wide Initiative to Prepare Engineering and Technology Students for the 21st Century”, submitted for review to the 2007 ASEE Annual Meeting.

Landon, S., Magleby, S., and Jensen, B., “A Compliant Rotating Joint for Deployable Wings on Small UAVs,” Proceedings of the 2007 ASME International Design Engineering Technical Conferences, Mechanisms and Robotics Conference, Las Vegas, NV, DETC2007-35821. This paper received the Compliant Mechanisms Applications Best Paper Award.

McKay, A., Magleby, S., and Howell, S., “A Pseudo-Rigid Body Model for Rolling Contact Compliant Beams,” Proceedings of the 2007 ASME International Design Engineering Technical Conferences, Mechanisms and Robotics Conference, Las Vegas, NV, DETC2007-35536.

Weight, B., Mattson, C., Magleby, S., and Howell, L., “Configuration Selection, Modeling, and Preliminary Testing in Support of Constant-Force Electrical Connectors,” Journal of Electronics Packaging, Transactions of the ASME, Vol. 129, September 2007, pp. 236-246.

Winder, B., Magleby, S., and Howell, L., “Representations of Pop-up Paper Mechanisms,” Proceedings of the 2007 ASME International Design Engineering Technical Conferences, Mechanisms and Robotics Conference, Las Vegas, NV, DETC2007-35505.

2006

Culpepper, M.L., DiBiasio, C.M., Panas, R., Magleby, S., and Howell, L. L., “Simulation of a Carbon nanotube–based compliant parallel–guiding mechanism: A nanomechanical building block”, Applied Physics Letters 89, No. 20, 203111 (2006). Also selected for publication in the November 27, 2006 issue of Virtual Journal of Nanoscale Science & Technology.

Flory, G.S., Chen, S. A., Woltz, L.A., Magleby, S., and Higley, J.D., “A computerized apparatus designed to automatically dispense, measure, and record alcohol consumption by individual members of a rhesus macaque social group”, accepted for publication in Methods (2006), Elsevier Inc.

Lewis, C., Magleby, S., and Todd, R., “Learning to Design Products in Environments with Limited Design Traditions”, International Journal of Engineering Education, Vol. 21, No. 3, 2006.

Todd, R., Magleby, S., and Parkinson, A., “Experiences and Observations in Introducing Students To Design and Manufacturing Globalization,” SME Journal of Manufacturing Systems, Vol. 24, No. 3, 2006.

2005

Brooks, S., Magleby, S., and Howell, L., “Grasping Mechanisms with Self-Centering and Force-Balancing Characteristics,” Proceedings of the 2005 ASME International Design Engineering Technical Conferences, Long Beach, CA, September 2005, DETC2005- 85478.

Cannon, B., Lilian, T., Magleby, S., Howell, L., and Linford, M., “A Compliant End-Effector for Microscribing,” Journal of Precision Engineering, Vol. 29, Issue 1, January 2005, pp. 86-94.

Carroll,D., Magleby, S., Howell, L., Todd, R., and Lusk, C., “Simplified Manufacturing through a Metamorphic Process for Compliant Ortho-Planar Mechanisms,” Proceedings of the 2005 ASME International Mechanical Engineering Conference and Exposition, Orlando, FL, IMECHE2005-82093.

Guerinot, A.E., Magleby, S.P., Howell, L.L., and Todd, R.H., “Compliant Joint Design Principles for High Compressive Load Situations,” Journal of Mechanical Design, Vol. 127, No. 4, pp. 774-781, 2005

Landon, S., Magleby, S., and Howell, L., “Preliminary Concepts for Deployable Wings on Small UAVs Using Compliance,” Proceedings of the 2005 ASME International Mechanical Engineering Conference and Exposition, Orlando, FL, IMECHE2005-82088.

Linford, M., Davis, R., Magleby, S., Howell, L., Jiang, G., Thulin, C., "Chemomechanical surface modification of materials for patterning" in Nano-lithography and Patterning Techniques in Microelectronics. Ed. by D.G. Bucknall, Woodhead Publishing and CRC Press, pp. 120-154, 2005. Invited Book Chapter.

Todd, R., and Magleby, S., “Elements of a Successful Capstone Course Considering the Needs of Stakeholders,” European Journal of Engineering Education, Vol. 30, No. 2, May 2005, pp. 203-214.

2004

Bishop, G., and Magleby, S., “A Review of Technology Push Product Development Models and Processes,” Proceedings of the 2004 ASME International Design Engineering Technical Conferences, Design Theory and Methodology Conference, Salt Lake City, Utah, September 2004, DETC2004-57496.

Crane, N.B., Howell, L.L., Weight, B.L., and Magleby, S.P., “Compliant Floating-Opposing-Arm (FOA) Centrifugal Clutch,” Journal of Mechanical Design, Trans. ASME., Vol. 126, No. 1, pp. 169-177, 2004, and published in Proceedings of 8th International Power Transmission and Gearing Conferences, 2000 ASME Design Engineering Technical Conferences, Baltimore, Maryland, DETC2000/PTG-14451.

Guerinot, A., Magleby, S., and Howell, L., “Compliant Mechanisms Concepts for Prosthetic Knee Joints,” Proceedings of the 2004 ASME International Design Engineering Technical Conferences, Mechanisms and Robotics Conference, Symposium on Medical Devices and Systems, Salt Lake City, Utah, September 2004, DETC2004-57416.

Johnson, D., and Magleby, S., “Considering the Manufacturing Environment of Less-Developed Countries When Choosing Product Concepts,” Proceedings of the 2004 ASME International Design Engineering Technical Conferences, International Engineering Design Conference, Salt Lake City, Utah, September 2004, DETC2004-57625.

Mattson, C., Howell, L., and Magleby, S., “Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms,” Journal of Intelligent Material Systems and Structures, Journal of Intelligent Materials Systems and Structures, March 2004, vol. 15, no. 3, pp. 195-202(8) and also published in Proceedings of the Adaptive Structures and Material Systems Symposium, ASME IMECHE, New York, New York, 2001.

Todd, R., and Magleby, S., “Evaluation and Rewards for Faculty Involved in Engineering Design Education,” International Journal of Engineering Education, Vol. 20, No. 2, 2004.
Todd, R., and Magleby, S., “Creating a Process to Design a Capstone Program that Considers Stakeholder Values,” Proceedings of the ASEE 2004 Annual Meeting, Salt Lake City, Utah USA, June, 2004.

Weight, R., Howell, L., Magleby, S., “Minimizing Performance Variation for the Compliant Floating-Opposing-Arm Clutch,” Proceedings of the 2004 ASME International Mechanical Engineering Conference and Exposition, Anaheim, CA, November 2004, IMECE2004-59574.

2003

Boyle, C., Howell, L., Magleby, S., and Evans, M., “Dynamic Modeling of Compliant Constant-Force Compression Mechanisms,” Journal of Mechanism and Machine Theory, Vol. 38, No. 12, pp. 1469-1487, 2003.

Jiang, G., Niederhauser, T.L., Davis, S.D., Lua, Y., Cannon, B.R., Dorff, Howell, L.L., Magleby, S.P., and Linford, M.R., "Stability of Alkyl Monolayers on Chemomechanically Scribed Silicon to Air, Water, Hot Acid and X-rays”, Journal of Colloids and Surfaces A: Physicochemical and Engineering Aspects. Vol. 226, (2003), issues 1-3, pp. 9-16.

Strong, M., Magleby, S., and Parkinson, A., “A Classification Method to Compare Modular Product Concepts,” Proceedings of the 29th ASME International Design Engineering Technical Conferences, Design Theory and Methodology Division, Chicago, Illinois, September 2003, DETC2003/DTM-48661.

2002

Christensen, M., Magleby, S., Howell, L., and Todd, R., “A New Self-Adjusting CVT Configuration Using Compliant Mechanisms,” proceedings of the 2002 ASME International Mechanical Engineering Conference and Exposition, Adaptive Structures and Material Systems Symposium, New Orleans, Louisiana, November 2002, IMECE2002/34000.

Clements, D., Magleby, S., and Howell, L., “Using Compliant Mechanisms to Improve Manufacturability in MEMS,“ Proceedings of the 28th ASME International Design Engineering Technical Conferences, Mechanisms Division, Montreal, Ontario, Canada, September 2002, DETC2002/MECH34178.

Ellsworth, K., Magleby, S., and Todd, R., “A Study of the Effects of Culture on Refrigerator Design: Towards Design for Culture,” Proceedings of the 28th ASME International Design Engineering Technical Conferences, Engineering Design Culture Division, Montreal, Canada September 2002, DETC2002/EDC-34383.

Weight, B., Magleby, S., and Howell, L., “Selection of Compliant Constant-Force Mechanisms Based on Stress and Force Criteria,“ Proceedings of the 28th ASME International Design Engineering Technical Conferences, Mechanisms Division, Montreal, Ontario, Canada, September 2002, DETC2002/MECH34206.

2001

Magleby, S.P., Todd, R.H., Sorensen, C., and Pugh, L., “Recruiting and Selecting Appropriate Industrial Projects for Capstone Design Programs,” International Journal of Engineering Education, Vol. 17, No. 4, 2001, pp. 400-405.

Parise, J.J., Howell, L.L., and Magleby, S.P., “Ortho-Planar Linear-Motion Springs,” Journal of Mechanism and Machine Theory, Vol. 36, Numbers 11-12, 2001, pp. 1281-1300.

Todd, R.H., Red, W.E., Magleby, S.P., and Coe, S., “A Case for Manufacturing Education,” Journal of Engineering Education, Vol. 90, No. 3, 2001.

Taylor, D.G., Magleby, S.P., Todd, R.H., and Parkinson, A.R., “Training Faculty to Coach Capstone Design Teams,” International Journal of Engineering Education, Vol. 17, No. 4, 2001, pp. 353-358.